Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Gain option on Prologic V11 ?
- Thread starter Papagigo
- Start date
This field specifies the amplification applied to the trunks in this group. With the
values of the Trunk Termination and Country fields, the value in this field also
determines the input and trans-hybrid balance impedance for TN465B, TN2146,
TN2147, and TN2184 ports. All other CO and DID circuit packs are set
automatically to high
Valid entries Usage
high Enter high if users complain of low volume.
low Enter low if users complain of squeal or feedback.
values of the Trunk Termination and Country fields, the value in this field also
determines the input and trans-hybrid balance impedance for TN465B, TN2146,
TN2147, and TN2184 ports. All other CO and DID circuit packs are set
automatically to high
Valid entries Usage
high Enter high if users complain of low volume.
low Enter low if users complain of squeal or feedback.
- Thread starter
- #3
- Status
Similar threads
