I've got a Gigabyte GA-7ZXR mobo which originally had a single Maxtor 40Gb drive attached.
I've just added a 60Gb Seagate Barracuda drive but it is only showing up as 40Gb.
I've not configure the RAID option via BIOS that I'm aware of. Checking the drives via BIOS they are both set to "user" and 40020 and 40027Gb respectively.
I've tried changing this to AUTO but it won't hold the setting even after "save and exit" from bios, and have also had a look with disk management (I'm on XP Pro) and Partition Magic to no avail.
Any suggestions would be greatfully appreciated.
Thanks in advance.
I've just added a 60Gb Seagate Barracuda drive but it is only showing up as 40Gb.
I've not configure the RAID option via BIOS that I'm aware of. Checking the drives via BIOS they are both set to "user" and 40020 and 40027Gb respectively.
I've tried changing this to AUTO but it won't hold the setting even after "save and exit" from bios, and have also had a look with disk management (I'm on XP Pro) and Partition Magic to no avail.
Any suggestions would be greatfully appreciated.
Thanks in advance.