G700 Ethernet Connections

[TykeUK]

Hi. We currently have only 1 ethernet connection into each of our G700s. This goes into EXT1. On the G700's there are two EXT ports.... is it possible to have this duplicated so we could have 2 ethernet connections into the G700?

If these were then connected to 2 core switches and one of these fails, should the G700 stay connected if the other core switch is still up?

Thanks

 

[phonebiz]

Yes, you can do this. Just make sure that Spanning Tree is enabled in the P330.

 

[Mitch672]

Lookup "set port redundancy", you can set the ports to be redundant to each other, so only 1 is active at a time.


Mitch

AVAYA Certified Expert