Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

G650 issue

Status
Not open for further replies.

Labash

Programmer
Apr 11, 2008
138
US
I have 2 G650 cabs.
The 2312 IPSI board in cab 2(A02)has a red light that remains lit constantly. It is the ETR light below the display. There is no dial tone in cab 2. Cab 1 seems to be working fine.
I have swapped out IPSI's with the same results.
Any ideas?
 
You need the IPSI boards to be working in both cabinets if they are in separate Port Networks.

If they're both in the same port network (and one is a backup for the other), you should check the lan-bus cable on the back of the G650s to make sure it's connected.

Carpe dialem! (Seize the line!)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top