I've come across a bunch of incorrect configs on my G450.. things such as spanning tree being enabled.. my 10/5 and 10/6 ports being set incorrectly.. multiple vlans. Are these things configurable remotely or should it all be done via the console? The site is in Asia and I have no tech staff there.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
G450
- Thread starter wpetilli
- Start date
montyzummer
IS-IT--Management
As long as you can still get connectivity to the unit in the VLan`s that are active on your network(so you are not changing IP address about that will affect this) , all can be configured remotely
APSS (SME)
ACSS (SME)
ACIS (UC)
APSS (SME)
ACSS (SME)
ACIS (UC)
- Thread starter
- #3
If you do make a change and get kicked out or lose control of the box, just have someone on site reboot it. As long as changes haven't been saved you will be ok. It's not the nicest solution, but it will work as long as you can communicate with someone exactly what to reboot.
dtlegend123
Technical User
Correct Crash! Just don't copy run start or nvram init. A reboot will restore previous config prior to the changes.
- Thread starter
- #6
montyzummer
IS-IT--Management
no
APSS (SME)
ACSS (SME)
ACIS (UC)
APSS (SME)
ACSS (SME)
ACIS (UC)
- Status
Similar threads
- Locked
- Question
- Locked
- Question