G450 Issues

[wpetilli]

Would there be any reason why I'd be unable to ping my G450GW IP, CM, and CDOM IP's, but able to ping SDOM/US/BSM? Had a system up and running fine in one location and moved it down the street with same IP schema and now having these issues.

 

[randyb19]

Have you gone in and verified that those services are in a 'running' state?

 

[wpetilli]

I'm not even able to ping the actual GW, which is the more simplistic of steps. At least with that I have a working system and can then move on to the survivable processor. This was a fully working/registered system in the other location. We cannot ping the GW from the local switch, but if you give the box an IP in the same subnet as the GW and directly connect to Eth 10/5 I can ping it. Weird.

 

[kyle555]

I've had some problems recently where gateways would go into LSP for no reason.

I can't ping/ssh the G450s from the core.
I can ping/ssh the S8300 CM IP that is inside the G450
If I "list survivable" in the core, I see that the LSP in the G430/450 is registered AND active
I can ssh from the core CM to the LSP in V1 of the G450, and then ssh to the G450 from the LSP sitting in V1 and reset the gateway
And then everything comes back

I've got a ticket open for it because it is the 2nd time in 3 months that it happens. I'm thinking a gateway firmware bug.

wpetilli - did you fix your problems by bouncing the gateway?

 

[wpetilli]

No, still not working. Not sure if a network issue or GW.

 

[wpetilli]

My issue is resolved.. 3 guesses? network team configured wrong mask on a static null route.