G430

[louay shaheen]

hi


i need to reset the password for the G430 but i tried to use (login:root password :ggdaseuaimhrke) but it dose not work

what i can do in this issue?

so please help me.

Thank you.

 

[janni78]

Did you do it through the services port?

Sometimes it seems to take a couple of times, don't know if it's cause I'm bad a spelling.

"Trying is the first step to failure..." - Homer

 

[AvayaTier3]

Are you trying this from the console cable or services port on the g430?
That does not work if you are trying to login over the network.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[kyle555]

That's been removed since 36.5 firmware.
You'd have to use the RST button with a paperclip or call Avaya

 

[montyzummer]

you can use the nvram init jumper switch inside the gateway to perform a default also ,

https://downloads.avaya.com/css/P8/documents/100067935

Page 122 onwards

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.

 

[kyle555]

There's this other backdoor procedure that involves a sledgehammer if you're feeling adventurous

 

[louay shaheen]

hi all


first of all there is no console port in my gateway and the second thing i tried several time through the service port but did not work with the (login:root Password : ggdaseuaimhrke) so i do not know what shall i do :/

Thank you.

 

[montyzummer]

So as Kyle has already pointed out you are most probably on a firmware that does not allow this type of access , you will have to use one of the other methods mentioned and default the kit ... or get Avaya do reset it for you.

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.