Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
G430 and 8300 lsp
- Thread starter Element73
- Start date
define a node-name for the LSP ("change node-names ip")
add it. "add survivable [node-name]"
usually this would be done after you have defined a new location ("change location"), and also defined the ip-network-regions ("change ip-network-region x", and also defined the ip-network-map to map the IP phones from that location to an IP-Network-Region/Location.
Of course you will need to define trunk groups for that locations PRI's or POTS lines, and define and "ars location" as well as "routes" for that location as well.
Mitch
AVAYA Certified Expert
add it. "add survivable [node-name]"
usually this would be done after you have defined a new location ("change location"), and also defined the ip-network-regions ("change ip-network-region x", and also defined the ip-network-map to map the IP phones from that location to an IP-Network-Region/Location.
Of course you will need to define trunk groups for that locations PRI's or POTS lines, and define and "ars location" as well as "routes" for that location as well.
Mitch
AVAYA Certified Expert
- Status
Similar threads
