G3SI V9 Upgrade 1

[rod1248]

In the process of upgrading a G3siV9 switch to what was supposed to be CM2.2 a 3.0 orange card was used. We are planning to go back to CM2.2 using the correct orange card. What if any are issues I should be aware of and what contingency plan or steps should we take if that does not work? Any help would be greatly appreciated.

Rod~

 

[Midstream]

Hopefully you still have a copy of your 9.x translations. You can always get a blank processor, load your translations on it, then upgrade with the correct orange card.

 

[rod1248]

Yes we do have a copy of the 9.5 translations. So the processor would be the only back up scenario if the software load to 2.2 does not work?

 

[Midstream]

Not the ONLY one, just the quickest, most reliable method of ensuring you're back at your original release level and ready to upgrade to 2.2 with the cleanest translations.

 

[rod1248]

Thanks for your help. We'll give it a shot going straight to 2.2 and use the 9.5 translations. I'll cross my fingers...