Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FYI..Nortel 450 does not support Analog Agents on ICC

Status
Not open for further replies.

x11

Instructor
Feb 11, 2008
29
US
FYI...

Cursed and Blessed is the day that we decided telcom would be our profession.
 
I got the following right from page 29 of the BCM450 Intelligent Contact Center Set Up and Operation Guide.


"Telephones without a display, such as telephones attached to an analog terminal adapter, cannot be used for Contact Center agent tasks. Nortel recommends that you read the telephone user card for your telephone before proceeding.
 
Don't believe Nortel ever supported analog phones on call center on any Norstar or BCM product.
 
And why should they. You are very restricted with no display.
 
I read that.. we had a customer that upgraded from 400 and they needed that. The main problem is that calls placed to that analog agent makes the 450 crash, all sets freeze and all the pri's go down...

Cursed and Blessed is the day that we decided telcom would be our profession.
 
Nortel has supported analog agents on every bcm/norstar they have a user card/guide in all documentation

Cursed and Blessed is the day that we decided telcom would be our profession.
 
That's news to me. Only way I could see that working is to have a skillset that overflows to an analog extension when nobody is logged in. I can't imagine trying to have a user use a flash button to enter F904, then their ID, password, etc.

From the 3.6 docs, which looks just like what hawks found in the 450 docs:

Non display telephones, such as telephones attached to an analog terminal adapter, cannot be used for Call
Center agent tasks. We recommend that you read the telephone user card for your telephone before proceeding.
 
why would you want alog sets in a CC environment ?

If its not broke tweak it..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top