FXO Port Problem

[acrobat2012]

Hi guys ,
I am facing weird problem in the FXO ports.Actually I am newly installed one FXO slot in my 3845 router.It is regiseterd in my call manager too.I confugured four PSTN lines on four port of the FXO card.we can dial the calls from the PSTN number to outside/internally.Is is working fine.But the problem is ,it is not receiving any incoming calls.If we dial this PSTN number, it is giving message of "Calls can not be completed as it dials, pls confirm your directory .."So it not receiving any incoming call, directly goes to voice message.I disabled voice mail also.But it is giving same problem.I will show my part of the confign of my router...

Port Config part..

voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone XX
no battery-reversal
timeouts call-disconnect 0
timeouts wait-release 1
timing hookflash-out 50

CCM Part....

dial-peer cor custom
!
!
!
dial-peer voice 2 voip

!
voice-port 4/1:15
!
ccm-manager redundant-host X.X.X.X X.X.X.X.
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server X.X.X.X.
ccm-manager config
!
mgcp
mgcp call-agent X.X.X.X 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
!
mgcp profile default

Please can any one guide me solve this problem.
Reg
ACROBAT

 

[whykap]

The message you get is not from vm. It is the annunciators in cucm. Your issue is with the CSS assigned to the fxo ports in cucm. It probably can't reach the phone you are pointing the fxo to therefore the annunciator message.

 

[acrobat2012]

@whykap..

I checked CSS and parttion,it is configured correctly.Also i checked route pattern, it is ok.
Please can you guide anymore to solve this issue.