Fwd Analog Extension to Another Analog Extension ??

[saphiamond]

I have about 3 analog fax lines that only exist in programing. I need to forward these through programing to other analog fax numbers.

Could someone please give me a step by step on how to do this?

It would be most appreciated!
Andre

 

[acewarlock]

Are the other Fax's at the same location or off site.

If you post 1 TNB of a fax you want to forward it would make it easier.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[saphiamond]

It's all internal (same site and pbx). x19401 nneds to forward to x19301. See below for TN printout. Please help me if you can. Thank you.

DN 19401
CPND
NAME 2NW.414 FAX
XPLN 16
DISPLAY_FMT FIRST,LAST
TYPE 500
TN 015 0 00 13 MARP DES 2NW414 27 MAY 2004


DN 19301
CPND
NAME 2NW.608 FAX
XPLN 16
DISPLAY_FMT FIRST,LAST
TYPE 500
TN 047 0 00 11 MARP DES 2NW608 22 JUL 2005

 

[bigindian65]

I usually make sure CLS has FNA HTA and plug a buttset or analogue phone into the back of the fax, or on the TN at the MDF and hit #1 and the extention I want to fwd to...

Mato' Was'aka

 

[johnpoole]

if those are just soft ext.. two good ways to it... one is rcfw.. the other is out the dn then put it back in as a maxp 1 acd

new
acd
1000
maxp 1
ncfw 2000..

now if i dial 1000 it rings to 2000.. no delay no tn no lic.

john poole
bellsouth business
columbia,sc

 

[johnpoole]

for remote call forward you need to add a scpw to the set, then print your rcfw code..

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Like JP said out the TN and creat an ACD

LD 23
new
acd
19401
maxp 1
ncfw 19301




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[saphiamond]

Perfect! It worked. Thank you so much for your help.

Andre

 

[acewarlock]

Which way worked?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.