Jan 20, 2010 #1 cole06 Technical User Jan 20, 2010 71 US is there a default password after being transferd with the FTR9*0 or is the config password the one to use.Thanks in advance .
is there a default password after being transferd with the FTR9*0 or is the config password the one to use.Thanks in advance .
Jan 20, 2010 #2 MarvO1 Programmer Apr 18, 2003 1,248 US Not a default passwword. You have to set one up for the RAD. MarvO said it Upvote 0 Downvote
Jan 20, 2010 #3 curlycord Programmer Sep 22, 2002 14,231 Toronto, Canada Enter one via F9** on site =----(((((((((()----= curlycord http://www.curlycord.com Upvote 0 Downvote
Jan 20, 2010 Thread starter #4 cole06 Technical User Jan 20, 2010 71 US One more thing if a norstar dosen't have a RAD external can you still connect remote with FTR9*0 by calling the operator? thanks in advance Upvote 0 Downvote
One more thing if a norstar dosen't have a RAD external can you still connect remote with FTR9*0 by calling the operator? thanks in advance
Jan 20, 2010 #5 curlycord Programmer Sep 22, 2002 14,231 Toronto, Canada No F9*0 is used to connect to a RAD, if no RAD then no connect. =----(((((((((()----= curlycord http://www.curlycord.com Upvote 0 Downvote
No F9*0 is used to connect to a RAD, if no RAD then no connect. =----(((((((((()----= curlycord http://www.curlycord.com
Jan 20, 2010 #6 curlycord Programmer Sep 22, 2002 14,231 Toronto, Canada What system is it?? =----(((((((((()----= curlycord http://www.curlycord.com Upvote 0 Downvote
Jan 21, 2010 Thread starter #7 cole06 Technical User Jan 20, 2010 71 US Sorry I didnt say what system it is , it's a Norstar MICs rls4.1 Upvote 0 Downvote
Jan 21, 2010 #8 DBrewsky Vendor Jan 23, 2006 1,381 US There is no initial password that is setup on an external RAD. If you need to get access, you can reset the password using the RAD reset function. Check out this post: http://www.tek-tips.com/viewthread.cfm?qid=217013&page=555 --DB Upvote 0 Downvote
There is no initial password that is setup on an external RAD. If you need to get access, you can reset the password using the RAD reset function. Check out this post: http://www.tek-tips.com/viewthread.cfm?qid=217013&page=555 --DB