FTP SMTP inbound 1

[Jpeanut]

I cannot get FTP, SMTP to work inbound. What am I missing? (other than a clue) I've tried port redirection without success. My setup so far is almost vanilla. Here's my config. Thanks in advance.

PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100

fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
access-list inside_access_in permit tcp any any
access-list inside_access_in permit icmp any any
access-list inside_access_in permit udp any any
access-list outside_access_in permit icmp any any
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
mtu outside 1500
mtu inside 1500
ip address outside 24.234.7.15 255.255.255.0
ip address inside 192.168.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 0.0.0.0 255.255.255.0 outside
pdm location 192.168.0.30 255.255.255.255 inside
pdm location 192.168.0.60 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface ftp 192.168.0.60 ftp netmask 255.255.255.255 0 0
static (inside,outside) tcp interface smtp 192.168.0.30 smtp netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 255.255.255.0 24.234.7.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet timeout 5
ssh timeout 5
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80

: end
[OK]

 

[brontosaurus]

looks to me like the only thing you're allowing in is ICMP, as per your access-list. You'll need to expand that list to include smtp and ftp.

 

[Jpeanut]

Yes, I forgetteded. Thanks.