FTP hangs after 1 Meg

[CRAIG2432]

I have a single SBS box. We now need to use FTP. I set up the FTP site on the server. Any user can log onto the ftp site, browse and downloand with no problems. None of the users can upload a file larger than 1Mb may be 1.01Mb. One of 2 errors happen.
1. The connection will seam to hang at 10 seconds left on the transfer. We can wait 30 mins and the connection is still open and say 10 seconds left.
2. The upload will take along time and then come back with error 200. Which I cannot seem to trace.

Any idea's?

 

[CRAIG2432]

OK sorted at last.

After the post by ShackDaddy, which was of massive use thanks again. It turned out that the problem was not with the server, isp, config or anything else.

I currently run Windows X64 (with not a single problem until now) When I tryed the FTP site from my laptop, other PC or any PC in the office the remote FTP site works fine.

Thanks again for all your help and I hope this thread saves some else a huge amount of time.

 

[ShackDaddy]

Ha!