Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
From 1.47 to 4.3
- Thread starter dttusa
- Start date
1st stacks need to have all units at same code level i.e. BOSS 3.1 or 4.0.
2nd you can upgrade to newest firmware but need to upgrade the software to compatible version - check Nortel web site for switch type and its version fw & sw.
3rd you need to look at the ISVN number of code rev being used - can only upgrade one ISVN level at a time
2nd you can upgrade to newest firmware but need to upgrade the software to compatible version - check Nortel web site for switch type and its version fw & sw.
3rd you need to look at the ISVN number of code rev being used - can only upgrade one ISVN level at a time
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question