Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fresh install 11.1.2.3 on IP 500v2 - Some annoying issues and Manager crashes. 2

Status
Not open for further replies.

joul

Programmer
Dec 21, 2005
112
SE
This description error/warning "Internal loopback address specified." can't be found googling or checking any manual:
IPO_internal_loopback_udn5n9.png


There are no problems registering SIP trunks, SIP phones or H323 phones on it. - but this configuration warning is annoying!

Since it is a warning, not an error, Clicking it will only open the System/System tab, but I can't find any setting that reflects it to get rid of it.
There is no "loopback address" in system, LAN settings or IP routes.
----------------------------------------------------------------------------------------------------------------------------------------
Manager crash when opening AutoAttendants-view with some customized columns:
Manager_AA_crash_hsctwe.png

Only solution for me was:
1. Quit. Restart Manager
2. Open config from another IP 500v2 with older software (worked with 11.1.2.0.0)
3. Re-Customize columns in Auto Attendants view to only show Name, Greeting Shortcode.
4. Close config and open the IPO with 11.1.2.3.
----------------------------------------------------------------------------------------------------------------------------------------
Web Manager Freeze on loading when opening Auto Attendant from Call Management Menu:
Works from Dashboard view
AutoAttendant_Editing_in_11.1.2.3_ffpbge.png
 
I'm giving a star just for the write-up/post. For whatever it's worth, Manager 11.0.2.3 has been a small bag of squirrels compared to the previous release (pulling a config takes considerably longer than it did with the earlier version, for example). I also saw your suggested answer to another post and I appreciate your energy here.

Tim Alberstein
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top