Fresh install 11.1.2.3 on IP 500v2 - Some annoying issues and Manager crashes. 2

[joul]

This description error/warning "Internal loopback address specified." can't be found googling or checking any manual:

There are no problems registering SIP trunks, SIP phones or H323 phones on it. - but this configuration warning is annoying!

Since it is a warning, not an error, Clicking it will only open the System/System tab, but I can't find any setting that reflects it to get rid of it.
There is no "loopback address" in system, LAN settings or IP routes.
----------------------------------------------------------------------------------------------------------------------------------------
Manager crash when opening AutoAttendants-view with some customized columns:

Only solution for me was:
1. Quit. Restart Manager
2. Open config from another IP 500v2 with older software (worked with 11.1.2.0.0)
3. Re-Customize columns in Auto Attendants view to only show Name, Greeting Shortcode.
4. Close config and open the IPO with 11.1.2.3.
----------------------------------------------------------------------------------------------------------------------------------------
Web Manager Freeze on loading when opening Auto Attendant from Call Management Menu:
Works from Dashboard view

 

[atcom]

Sounds like you've discovered a lovely bug there - thanks for the detailed write up!

-----------------------------------

Business Phone Systems for Canada

 

[dagwoodsystems]

I'm giving a star just for the write-up/post. For whatever it's worth, Manager 11.0.2.3 has been a small bag of squirrels compared to the previous release (pulling a config takes considerably longer than it did with the earlier version, for example). I also saw your suggested answer to another post and I appreciate your energy here.

Tim Alberstein

 

[derfloh]

The internal loopback address is usually the Syslog target IP on the primary server. That is technically OK (so only a warning) but as they want to have the same Syslog target on all nodes you should set it to the real primary server IP everywhere and you should be good.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN