Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Free / Unassigned Station Numbers

Status
Not open for further replies.

JRav

IS-IT--Management
Mar 4, 2022
2
US
thread965-1773828

The above thread seems to give all number ranges but I need a way from ComWin to get a list of all unassigned numbers on my 4K v8
 
Add all numbers again that you think should be there
example your range is 2000&&2999
so
ADD-WABE:2000&&2999,,,STN,N;
It might say partially added or already added.

Then to see spare/unused numbers
DIS-WABE:GEN,,,,STN;
Free/unused numbers will show up with an 'R' - Reserved
Converted by AMO RUFUM will show up as 'C'
and DNIT numbers will show up as 'D'

 
Thank you @sbcsu

That was helpful.
 
THIS COMMAND WILL GIVE YOU ALL ASSIGNED NUMBER FOR ANALOGUE
<DISPLAY-SCSU:STNO=2000&&2999,TYPE=CONN,CONN=DIR;
DISPLAY-SCSU:STNO=2000&&2999,TYPE=CONN,CONN=DIR;
H500: AMO SCSU STARTED
-----------------------------------------------------------------------------
DIRECTLY CONNECTED STATION(S)
-----------------------------------------------------------------------------
2101 2102 2103 2104 2105 2106
2107 2108 2109 2110 2111 2112
2113 2114 2115 2116 2117 2118
2119 2120 2121 2122 2124 2125
2126 2127 2128 2129 2130 2131
2132 2133 2171 2172 2173 2174
2176 2219 2220 2221 2225 2227
2233 2234 2235 2236 2237 2238
2239 2240 2241 2242 2243 2244
2245 2246 2247 2248 2249 2250
2251 2253 2254 2255 2256 2260
2264 2266 2272 2276 2289 2295
2296 2297 2299 2301 2311 2312
2314 2317 2319 2337 2363 2367
2393 2394 2395 2398 2399 2400
2401 2402 2403 2404 2405 2406
2407 2424 2431 2441 2450 2455
2460 2461 2463 2464 2465 2466
2467 2468 2469 2470 2471 2473
2474 2475 2476 2478 2488 2489
2490 2493 2502 2503 2504 2505
2506 2507 2508 2509 2510 2512
2513 2514 2515 2516 2517 2518
2519 2520 2521 2522 2523 2524
2526 2527 2528 2529 2530 2532
2533 2534 2535 2536 2537 2538
2540 2541 2542 2543 2546 2548
2551 2570 2573 2578 2582 2585
2590 2592 2595 2598 2612 2614
2617 2620 2621 2622 2623 2624
2625 2626 2627 2628 2629 2630
2631 2632 2633 2634 2635 2636
2637 2638 2639 2640 2641 2642
2643 2649 2650 2655 2660 2661
2662 2663 2664 2665 2666 2667
2668 2669 2670 2671 2672 2673
2674 2675 2676 2677 2678 2679
2680 2681 2682 2683 2684 2685
2686 2700 2701 2702 2703 2704
2705 2706 2707 2708 2709 2710
2711 2712 2713 2714 2715 2716
2717 2718 2719 2720 2721 2722
2723 2724 2725 2726 2728 2729
2730 2731 2732 2733 2734 2735
2736 2737 2738 2739 2740 2741
2750 2805
-----------------------------------------------------------------------------

AMO-SCSU -111 STATION CONFIGURATION OF SWITCHING UNIT
DISPLAY COMPLETED;
THIS COMMAND WILL GIVE YOU ALL ASSIGNED NUMBER FOR DIGITAL SUBSC
<DISPLAY-SBCSU:STNO=3000&&3599,TYPE=SEARCH,CONN=DIR;
DISPLAY-SBCSU:STNO=3000&&3599,TYPE=SEARCH,CONN=DIR;
H500: AMO SBCSU STARTED

-------- SUBSCRIBER WITH --------------------------
DEV : CONN : DIR
TRACE : COSNO :
KEYSYS : LCOSV :
INS : LCOSD :
---------------------------------------------------
3000 3001 3002 3003 3004 3005
3006 3007 3008 3009 3010 3011
3012 3013 3014 3015 3016 3017
3018 3019 3020 3021 3022 3023
3024 3025 3026 3027 3028 3029
3030 3031 3032 3033 3034 3035
3036 3037 3038 3039 3040 3041
3042 3043 3044 3045 3046 3047
3050 3070 3071
SIP SUBSCRIBER
<DISPLAY-SBCSU:STNO=3000&&3599,TYPE=SEARCH,CONN=SIP;
HFA SBSCRIBER
DISPLAY-SBCSU:STNO=3000&&3599,TYPE=SEARCH,CONN=IP2;
AND THIS GIVE YOU ASSIGNED AND Free Numbers
<DISPLAY-WABE:TYPE=STN;
DISPLAY-WABE:TYPE=STN;
H500: AMO WABE STARTED
------------------------------------------
| STN FOR DESTNO 0 |
| DNNO 1- 1-102 |
| OWN NODE |
------------------------------------------
| 2000 - 2778 |
| 277900 - 277923 |
| 2780 - 2989 |
| 2991 - 2998 |
| 3000 - 3409 |
| 3500 - 3699 |

bEST REGARDS
OKACHA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top