I'm setting up my lab and I can't get my routers to ping each other over frame. Anyone know what the issue could be? Frame-relay switching is enabled on R1. Both routers are 1841's.
R1#sh run int s0/0/0
!
interface Serial0/0/0
ip address 189.18.12.1 255.255.255.0
encapsulation frame-relay
clock rate 56000
frame-relay map ip 189.18.12.2 102 broadcast
frame-relay interface-dlci 102
no frame-relay inverse-arp
frame-relay lmi-type ansi
frame-relay intf-type dce
end
R2#sh run int s0/1/0
!
interface Serial0/1/0
ip address 189.18.12.2 255.255.255.0
encapsulation frame-relay
frame-relay map ip 189.18.12.1 201 broadcast
frame-relay interface-dlci 201
no frame-relay inverse-arp
frame-relay lmi-type ansi
end
Serial0/0/0 189.18.12.1 YES manual up up
Thanks for the help!
R1#sh run int s0/0/0
!
interface Serial0/0/0
ip address 189.18.12.1 255.255.255.0
encapsulation frame-relay
clock rate 56000
frame-relay map ip 189.18.12.2 102 broadcast
frame-relay interface-dlci 102
no frame-relay inverse-arp
frame-relay lmi-type ansi
frame-relay intf-type dce
end
R2#sh run int s0/1/0
!
interface Serial0/1/0
ip address 189.18.12.2 255.255.255.0
encapsulation frame-relay
frame-relay map ip 189.18.12.1 201 broadcast
frame-relay interface-dlci 201
no frame-relay inverse-arp
frame-relay lmi-type ansi
end
Serial0/0/0 189.18.12.1 YES manual up up
Thanks for the help!