FQDN in XML Configuration files

[robertkip]

Hello,

I'm trying to reflect a FQDN inside the XML configuration files(.cnf) instead of the CM IP address, ex:
<callManager>
<name>cucmoffcie.com</name>
<processNodeName>cucmoffcie.com</processNodeName>

instead of:

<callManager>
<name>192.168.1.10</name>
<processNodeName>192.168.1.10</processNodeName>

Where should we configure this on CUCM, is it something to select through the installation process? I'm working on 7.1 and 8.5 versions.

Thanks!

 

[whykap]

When you install the server you must select that you will use DNS. If this was not done (sounds like it) you can still add the DNS configuration manually.

 

[robertkip]

Thank you whykap.

Can you tell me in which part of the installation I should select DNS? And if I want to do this after the installation is it using the below command:
CLI > set network domain

Thanks

 

[whykap]

http://www.cisco.com/en/US/products...s_configuration_example09186a0080a9a0fe.shtml