Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Foxpro Starting Screen Position 2
- Thread starter SuperBob
- Start date
-
1
- #2
Mike Gagnon
Programmer
Are your talking VFP itself, if so, right-mouse on the icon on your desktop and select properties, run-Maximized.
If you are talking an application, in your main program use:
_SCREEN.WINDOWSTATE=2
Mike Gagnon
If you want to get the best response to a question, please check out FAQ184-2483 first.
-
1
- #3
HI
If you have Maximized the screen and then closed the VFP, next time it should start maximized. If it did not, then likely the resources are set that way.
You can find out from the command window..
? SYS(2005)
The location of the file be displayed. Reach that directory and delete the foxuser.* Then restart. Hopefuly that will fix your problem.
Also, if you use any Config.fpw, look into that for any resources setting.
ramani
(Subramanian.G),FoxAcc, ramani_g@yahoo.com
If you have Maximized the screen and then closed the VFP, next time it should start maximized. If it did not, then likely the resources are set that way.
You can find out from the command window..
? SYS(2005)
The location of the file be displayed. Reach that directory and delete the foxuser.* Then restart. Hopefuly that will fix your problem.
Also, if you use any Config.fpw, look into that for any resources setting.
ramani (Subramanian.G),FoxAcc, ramani_g@yahoo.com
- Status
Similar threads
- Locked
- Question
