Any way to FWD all analogue lines on a phone system? Currently I have a FWRD on the main number, analog trunk to trunk is on, and I have a hunt group with a phantom user in it, which is FWRDing to external number. Problem is, they want all the lines, (6) to fwrd to the same location, beacause people are calling back the caller ID trying to get after hrs help instead of calling back the number they are supposed to? Any way to accomplish this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Forwarding Analog Lines
- Thread starter lcsavaya
- Start date
- Thread starter
- #2
amriddle01
Programmer
You can set all 6 to forward but they can't all forward at the same time as ther would be no trunks to call out on, so max that can forward at once is 3 
- Thread starter
- #4
amriddle01
Programmer
If they all target the same group that is forwarded they will do it anyway, if they target seperate destinations then that also needs forwarding offsite, issue comes if they are assigned wih different outgoing line groups etc
Telecomboy
Programmer
Make sure trunk to trunk connect is allowed under lines.
- Status