Hi, I have a customer with 5 sites using a UCX250 at each site interconnected over private intranet with SIP trunks. They have a situation where a caller leaves a voice message at site A, and the user needs to forward the message on to site B. I suggested using virtual extensions as a drop box at each site that, in turn, emails the remote site with an attachment. Then it can be forwarded on to the final destination through email. Is there a better way to allow the forwarding of messages between sites?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Forward voice message to remote site.
- Thread starter andercom
- Start date
- Thread starter
- #3
Thanks for the response. For reasons of their own that don't totally make sense to me, and other reasons that do make sense, like not having speakers at the workstations, the customer does not really want to utilize the voicemail to email feature. Even as I suggested that they do it just for the sake of solving this problem, they'd rather not use or manage this feature. I was hoping there was a way for seperate UCX voicemail system to integrate enough to transfer messages between them. I found an old thread that pretty much says I can't do this.
- Status
