Forward External during power outage

[MikeSayers]

Guys, newbie here, I know just enough to be dangerous. Tell me why this doesn't work or suggest an alternative.

We've had a power failure in our main building. Satellite buildings are still powered, PBX and servers are on a (diesel) generator.

Folks who work in that building need their phones forwarded. I've done the example below, it does NOT work: I get 4 ring tones then it goes to the FDN (voice mail). You can call the destination number from the set (if it was powered). I can change the DN and set an ACD and it works, but I hate to keep doing that. Does the (IP) phone need power for CFW to work? Any better way?

TN 112 0 02 12 VIRTUAL
TYPE 2002P2
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 00003
CUR_ZONE 00003
MRT
ERL 256
ECL 0
FDN 2200
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 0
SCI 0
SSU
XLST
SCPW
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA CRPD
MWA LMPN RMMD AAD IMD XHD IRD NID OLD VCE DRG1
POD SLKD CCSD SWD LND CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGNA OCBA FLXD FTTC MCBN
VOLA VOUA CDMR PRED RECD MCDD T87D SBMD
KEM2 MSNV FRA PKCH MUTA MWTD DVLD CROD ELCD
CPND_LANG ENG
RCO 0
HUNT 2200
LHK 1
PLEV 02
PUID
UPWD
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 2563 0 MARP
CPND
NAME irrelevant
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 3563 D MARP
02 ADL 16
03 ADL 16
04
05
06
07
08
09
10
11
12
13
14
15
16 MWK 2200
17 TRN
18 AO6
19 CFW 11 91234567890 (not actual #)
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 8 OCT 2015

 

[bhassell2000]

is the CFW button activated before they leave their desk or for the test?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[MikeSayers]

Not activated at phone, no power to phone, no easy way to accomplish this.

 

[bhassell2000]

if its not activated it wont follow the CFW key programming, I am not sure if Remote Call Forwarding will work for you or not but you can try it if you are allowed to have it

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[anders4249]

Let me see here.. shouldn't CFTA be set in CLS for the set to forward externally via the CFW button? Just a thought. Also, if you have access to the MDF "you" can CFW the sets from the TN yourself. (if there isn't that many)

 

[KCFLHRC]

CFTA is Call Forward By Call Type so you can have different forwarding for internal vs external calls. CFXA is for external call forward.