Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Forward Ext to Long Distance Number 1

Status
Not open for further replies.

abartolino

Technical User
Apr 4, 2008
34
US
How do I creat a phantom ext and then have that phantom forward to a long distance number?
 
Find an unused Phantom TN

Create a new Phantom TN in LD10

Make the NCOS high enough to dial the number

Set CLS CFXA

Set FTR DCFW 12 914145551212 replacing my number with your own desired number

Don't know where your Phantoms are? LD22 REQ PRT TYPE CEQU

Dont know what a Phantom is? Use an ACD Queue then. LD23 ACDN (a DN); MAXP 1, then set NCFW 914145551212

That'll get you on track I hope

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
 
Go to LD 20

LUVU (ent)
500 (ent)

Look for something that resembles:

TYPE 500 TN 208 0 01 13 PHANTOM 4D The important part is PHANTOM.

Once you have the spare phantom port you create it as any other 500 set. However when you are doing the facility programming, you will add:

CLS CFXA FTTU

FTR DCFW 12 123456789
and
FTR CFW 12

Why the CFW? DCFW will be a default and permanent forward number. If you want to vary it, you add an SCPW to the extension, then you can "remote call forward". A CFW will take precedence over a DCFW.




 
I was able to locate and setup the phantom OK. When I dial the number from an outside line I keep getting our receptionist. I've listed the 500 config below and x out the longdistance number.

DES
TN 061 0 00 07 PHANTOM
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 8187 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTU
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 12
FTR DCFW 12 xxxxxxxxxx
DATE 21 OCT 2010
 
I got it now. We prompt for long distance code. I change the tgar not to give the prompt. I'm good now.

Thanks for the help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top