Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FORGOT LOCAL ADMIN PASSWORD !!!
- Thread starter hdeassis
- Start date
go to and/or erd will get you out of this with no problems. been there, done that.
You'll need to find NTFSDOS (Can't remember where to get it)
1 - Boot the machine with NTFSDOS.
2 - Rename logon.scr to logon.old
3 - Copy cmd.exe to logon.scr
4 - Wait 15-20 mins until the standard NT logon.scr kicks in, at this point it will launch cmd.exe due to 3 above.
5 - Run musrmgr.exe from the above cmd prompt.
6 - Give the administrator a new password.
7 - Reboot with NTFSDOS and rename the files back to their original state.
8 - Reboot into NT with the new administrator password.
Just takes a bit of time.
Cheers.
Seán.
1 - Boot the machine with NTFSDOS.
2 - Rename logon.scr to logon.old
3 - Copy cmd.exe to logon.scr
4 - Wait 15-20 mins until the standard NT logon.scr kicks in, at this point it will launch cmd.exe due to 3 above.
5 - Run musrmgr.exe from the above cmd prompt.
6 - Give the administrator a new password.
7 - Reboot with NTFSDOS and rename the files back to their original state.
8 - Reboot into NT with the new administrator password.
Just takes a bit of time.
Cheers.
Seán.
- Status
Similar threads
- Locked
- Question
