FNP

[ArturoMonterrey]

Hello, everybody.

How can I activate the FNP in LD 15. I can´t.
This choice not appear.

I need activate FNP, because I want to activate the FLEN in the LD 90 for a SPN in the AC2.

I have a Meridian Option 11c,

I don´t know the version (release), How can I check the version or realease.

I want to activate the FNP, because I have a DTI2 for E1 and this is connected to other PBX (PBX2), so I have SPN´s and when I dial this SPN´s, the call go to PBX2, I use DMI´s for these SPN´s. But, if I dial slow, the call droop, if I dial fast, the call is connected.

So, I want to activate the FLEN to these SPN´s and the call will be send until the last number is dialed.


Thanks.

 

[HASAGO]

To change the FNP prompt you should get something like the below...you will need release 23 and above to get the prompt.

>LD 15
CDB000
MEM AVAIL: (U/P): 477872 USED U P: 580169 121606 TOT: 1179647
DISK RECS AVAIL: 334
REQ: CHG
TYPE: NET_DATA
CUST 0
OPT
AC2
FNP

To check your current software release etc.

>LD 22
PT2000

REQ ISS

CALL SERVER/MAIN CAB
VERSION 2121
RELEASE 3
ISSUE 00 +
IDLE_SET_DISPLAY

Another point to add is that you can press the # key once you have finished dialling all digits which will then send all digits to far end immediatley. Hope this helps?

 

[ArturoMonterrey]

Hello!!


I have a Meridian Option 11c:
Release: 25
Version: 2111
PSWV Version: PSWV 33


I can´t activate the option FNP.

>LD 15

REQ: CHG
TYPE: NET_DATA
CUST 0
OPT
AC2
.
.
.
.
.
.
.
.

and never show me the FNP.

How can I do to activated the FNP.

 

[mluckie1]

Check to see if the PKG is there. PKG is 160 for FNP

 

[ArturoMonterrey]

How can I check the pkg?

 

[srmega41]

LD 22
REQ  PRT
TYPE PKG

This will give you a long list, in numerical order.

Hope this helps,

Scott M.

 

[ArturoMonterrey]

Thanks Scott,

This PBX don´t have Package 160.


How can I activate the PKG 160.




Regards.

 

[Reusser]

call your sales rep and get out you check book