I have my analog line 061 set up to appear on my extension, it does not ring. The CCR is set to answer my line in 2 rings. Ether wa when the line is ringing waiting for the CCR to answer, FM/FM starts to dial my cel. This has been a little crazy, since eveny time I get a missed number from my office, I go searching for who called.
Now I was able to correct this in two ways;
(1) change the time from when FM/FM starts to dial from 0 to 8 seconds, but the downfall is I want my cell to start dialing imidiately once my extencion is rang, due to the fact that the connection time takes up to 2 rings to go through.
(2) remove line 061 from my set. (this has been the easiest; but now I am unable to monitor the lines...
Any other ideas?
Now I was able to correct this in two ways;
(1) change the time from when FM/FM starts to dial from 0 to 8 seconds, but the downfall is I want my cell to start dialing imidiately once my extencion is rang, due to the fact that the connection time takes up to 2 rings to go through.
(2) remove line 061 from my set. (this has been the easiest; but now I am unable to monitor the lines...
Any other ideas?