Flexible Feature Codes (FFC's)

[simonthorpe]

Hi,
Is there a way of retrieving a list of FFC's from my switch? i want to know if there is an FFC setup for "make set busy" i have i2001 phones and need this feature to aid in a hunt group.

Simon

 

[SL1M1]

Is it a list of FFC's (FlexibleFeatureCodes) or a list of MSB Key's?

I think you want a list of MSB Keys

LD 81
REQ LST
RETURN through to
FEAT MSB

This will give you a list of sets/TN's with the Key Nr's assigned to that feature

If its a list of FFC's you want then it's:-

LD 57
REQ PRT
TYPE FFC
CUST X
CODE (Return will give you all programmed)

Cheers!!

 

[simonthorpe]

Hi thats great thanks, how do i assign codes to MSBA and MSBD?

 

[MossEng]

LD 57
REQ CHG
TYPE FFC
CUST 0
FFCT (Enter)
CODE MSBA
MSBA **4 (Or any available code **4 just an example)
CODE MSBD
MSBD ##4
CODE (Enter)

You can check for available codes in LD 20

LD 20
REQ PRT
TYPE LUDN
CUST 0
DN (Enter for all spare Numbers, or enter * or # for combinations starting * or # )

 

[simonthorpe]

Hi Thanks for that,
I have done that, however when i dial *43 it just says release and try again,
do i need to do anything else?

 

[gwebster]

Check the documentation but you will probably find that the MSB FFC only works on analog phones. For digital/IP phones, it needs to be programmed on a key. For IP Phones in particular, MSB is not programmed against keys 16-26 (which is used for the soft keys) so has to be programmed against one of the other programmeable keys. The IP Phone 2001 (and IP Phone 1110/1210 and IP AudioConference Phone 2033) only have one programmeable key.

Summary is that you cannot do MSB on an IP Phone 2001.

 

[johnpoole]

Is there a way of retrieving a list of FFC's from my switch?

 ld 57
FFC000

REQ  prt
TYPE ffc
CUST 0
CODE all

john poole
bellsouth business
columbia,sc