Spokes0831
Technical User
How do you turn on the FLEN for location codes? I am not seeing the FLEN feature when I print out a location code.
Thanks In advance!
Thanks In advance!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FLEN for Location Codes...
- Thread starter Spokes0831
- Start date
- Status
bigindian65
Technical User
There isn't a "turn on" so to speak, do a chg or prt in ld 90 and the prompt should be there
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #3
Spokes0831
Technical User
I tried both and no dice.I outted the location code and rebuilt it and does not prompt me with the FLEN.
bigindian65
Technical User
you have pkg 150 dnxp?
Mato' Was'aka
Mato' Was'aka
bigindian65
Technical User
are you printing HLOC instead of LOC? or do you only have an HLOC in? Because there is no FLEN with Home location code, because your HLOC does not leave your PBX, there is no reason to outpulse a FLEN.
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #6
Spokes0831
Technical User
I figured it out. You have to go into LD-15 and set FNP to yes. It was not turned on.
Thanks!
Thanks!
bigindian65
Technical User
Hmm, that is a default yes mnewmonic, so actually, someone had to go there and set it to no.lol Good find
Mato' Was'aka
Mato' Was'aka
- Status
Similar threads
- Locked
- Question
- Locked
- Question