Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flashing LED on Digital phone

Status
Not open for further replies.

jackdaniels1955

Technical User
Jul 26, 2002
24
GB
Why does the led on a digital telephone continue to flash after ring back has been set and used? How can the flashing be cleared other than removing and entering "key " command again?
 
Try doing a #31#

This will clear any ringbacks stored against your phone, if this does not work, it may require some more investigation, so come back to us.
 
#31# doesn`t clear the light, I had another code which was cancel ringback, but that didn`t work either. Does anyone know a command to printout what codes do what (cept codes??)
 
I think you have to to look in Alex.
The reason is that differnet codes are be used in all countrys.
You can find it in "applications system country/Extension facilities "
 
I dont know of any commands to find this out,but If anyone knows them I would be interested too

However to cancel callback we use

#37# to cancel all callbacks

&

#37* ext number # to cancel individual callbacks.

Dont know if that will work for you.

JD
 
And try also

#001#

This will cansel all pre-ordered services.


Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top