norstargirl
Vendor
I have a flash vm 1.7 that when I try to log in under the feature 983 and enter the log number I get not allowed..
M.Parnell
(norstargirl)
M.Parnell
(norstargirl)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flash vm
- Thread starter norstargirl
- Start date
- Status
curlycord
Programmer
- Thread starter
- #3
norstargirl
Vendor
I am I am using a M7324 phone - I can get into feature 985 and 982 but not 983
M.Parnell
(norstargirl)
M.Parnell
(norstargirl)
fireeater
Technical User
- Dec 10, 2008
- 780
is someone else logged in at another set and forgot to hang up
you should only get that message if on a small set 7208 of f983 is in use
HALLOWED ARE THE ORI
mike
you should only get that message if on a small set 7208 of f983 is in use
HALLOWED ARE THE ORI
mike
- Thread starter
- #5
norstargirl
Vendor
no I am just testing the unit and there is only 1 phone connected to the unit
M.Parnell
(norstargirl)
M.Parnell
(norstargirl)
fireeater
Technical User
- Dec 10, 2008
- 780
ahhh has it been initializes with the f903
(or is that the 1.9 software that needed that)
HALLOWED ARE THE ORI
mike
(or is that the 1.9 software that needed that)
HALLOWED ARE THE ORI
mike
- Status
Similar threads
