Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flash Time: Analogue Extension
- Thread starter ginsgoc88
- Start date
velcrobomb
IS-IT--Management
change system-parameters features
Depending on what version you system is, it's on page 7 or 8 of this command.
I'm not sure if this will work, and you may want to check with Medak or Avaya, but there is a Recall Timing Field.
I believe you may set the flash interval there in milliseconds.
Not positive though.
Depending on what version you system is, it's on page 7 or 8 of this command.
I'm not sure if this will work, and you may want to check with Medak or Avaya, but there is a Recall Timing Field.
I believe you may set the flash interval there in milliseconds.
Not positive though.
- Status
Similar threads
- Locked
- Question