flash 4 1

[ge2511]

I have a flash 4 connected to a 6x16,I have AA set up with simple CCR,with 2 incoming lines.
My problem I can't figure out is when I am on the only line that the flash answers,(right now it only answers one),and another call comes in,the GD mailbox answers on the first ring.
Can anyone give me a suggestion as to what settings may be wrong.
Thanks in advance,
Gary

 

[MarvO1]

If both lines ring on the set you are talking on, you probably have your set FOB (forward on busy)to your Flash 4.

MarvO said it

 

[ge2511]

I will check that out,I think they are FOB. But a silly question,if they aren't,then if the ext is busy,they won't go to the flash,is that right.
Thanks agsin in advance.
Gary

 

[MarvO1]

Anything that rings on a set will go directly to the Flash with FOB if the set is in use. Better to use FNA 4 rings or so, or have the other line not ring on your set.

MarvO said it