flash 4 port voicemail

[ge2511]

Let me start off, I am not a tech, I have a Norstar in my home, with 2 lines. I know just enough by reading the manuals and getting help on here to get by in programming.
I have a Flash 4 port, that was not used for aqbout a year, and when I decided I wanted to use it again, after some investigating, I found the PCI card went bad. So I had a spare one, replaced it and now works again.
What I can't remember, I believe when I used it last, I couldn't have any of the exts. be answered by the flash cause when an outside line would ring (I have 2 lines, all sets have both lines ring and appear),they would all be answered right away by the flash.
Is there a way around that, so I can have the 2 lines answered if no one picks up the phone, and also have the exts go to voicemail.

Thanks for any hgelp in advance, and sorry if this is tooo long.

 

[curlycord]

Have AA/Line pickup after 3 rings but have Call Forward No Answer set to 4 rings for each phone.

 

[ge2511]

Thanks for your reply. I will try that.

 

[curlycord]

In case you want to get fancy with CCR Tree at home here is my setup......

Greeting 1:
You have reached XXX-XXXX

Path 0:
For Joe Blow press 1
For Jane Blow press 2
For Rugrat press 3
Telemarketers please Press 4
Thanks and have a great day.

Path 1 setup as Transfer Internal to Joes's ext
Path 2 setup as Transfer Internal to Janes's ext
Path 3 setup as Transfer Internal to Runt's ext
Path 4 setup as Info mailbox, record 'sorry we could not get to your call, please leave us the times when you have dinner or go to bed so that we may call you at one of those times indicated' then program to disconnect call at end.