I am looking for someone with a Spectralogic 10000 with AIT3 tape drives to make us a firmware tape from their tape library. We are willing to pay $100 to anyone who can make one from their library and send to me. The procedure as to how to do it is below and it's quite easy to do. Our tape library's firmware got corrupt during a power outage and we can't find our firmware tape. The payment will be done by paypal. Thanx.
john.dossett77(at)gmail.com
Spectra Logic 10000 Users Guide
Creating a Backup Firmware Tape .. page 67
To create a code tape:
1. From the main screen, touch Menu > Miscellaneous > Create Code Tape. The Code Tape screen appears (Figure 5-4).
2. A message confirms creating a current firmware code tape. Touch OK tocontinue.
3. Place a tape in the library door, then touch OK. The library moves the code tape into Drive 1 and creates the code tape (this takes approximately two minutes).
4. Remove the new code tape and label it with the volume number and creation date.
john.dossett77(at)gmail.com
Spectra Logic 10000 Users Guide
Creating a Backup Firmware Tape .. page 67
To create a code tape:
1. From the main screen, touch Menu > Miscellaneous > Create Code Tape. The Code Tape screen appears (Figure 5-4).
2. A message confirms creating a current firmware code tape. Touch OK tocontinue.
3. Place a tape in the library door, then touch OK. The library moves the code tape into Drive 1 and creates the code tape (this takes approximately two minutes).
4. Remove the new code tape and label it with the volume number and creation date.