Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Firmware question

Status
Not open for further replies.

ItsAlx

IS-IT--Management
Nov 7, 2011
4
I'm having trouble joining new extensions. Current IP 710 phones are running version 060B.010B.1353. I have a few newer IP 710 phones running 070E.010B.2135 and I am unable to join them. After the #27 screen and entering the new extension and password, I get "Registering" for a few seconds then back to the #27 request. I'm running Altiware 5.0A with update 4. Is there any way to get these newer firmware versions to work?
 
You need to downgrade the Firmware on the phones. Your 5.0A system is probably using the H.323 protocol and with 5.1 it changed to SIP. These new phones will only work with SIP Servers. There should be a TFTP program on your system so that you can send new firmware to the phones.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top