Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Firewall 2003

Status
Not open for further replies.

gianni20

Technical User
Jun 2, 2005
26
IT
Guys i've a domain with win 2003 server enterprise.
i would like to install a firewall software, who can suggest me a simple but good firewall?
 
if you use SP1, there is the windows inbuilt firewall...

simple but good....., there's a good question ;-)

i'd rather go for a linux box serving as a firewall, with ipchains (or guarddog)

Aftertaf
________
Regain control of your PC, at If you break your hard drive, it'll be DPlank's fault
 
i'm thinking of install zone labs firewall but maybe it can block more program, of network.
is The win firewall sufficient?
 
imho, neither is professional enough...
i could be wrong about the 2k3 builtin firewall, but ive not used it much (on XP, a bit more, but then again, its not very advanced.)

it depends on what you want to do, what you need a firewall specifically for...
there are cheap and expensive hardware and software solutions, it depends what you need out of it.


Aftertaf
________
Regain control of your PC, at If you break your hard drive, it'll be DPlank's fault
 
i've a little network with a domain that share internet connection and file. i would protect the server and the clients with a firewall software from external attacks
 
internet connection shared... you use rras & nat?

what device do you use to connect to internet? an adsl router?
if so it may have firewall builtin that you can use without complicating matters further.

Aftertaf
________
Regain control of your PC, at If you break your hard drive, it'll be DPlank's fault
 
no, i've an adsl modem and the server share internet connection with freeproxy (proxy server)
 
so the modem is connected to the server with the freeproxy installation then?
ok.

in that case, the windows firewall with sp1 should be enough.

you have a server that is multihomed (1 NIC on LAN, 1 adsl modem on internet) and you activate the firewall on the net connection only.
enable it just for http port 80 and you'll be fine.


Aftertaf
________
Regain control of your PC, at If you break your hard drive, it'll be DPlank's fault
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top