Hi,
I have just installed a new router at a site where there was a SOHO6 with a public IP on untrusted and MUVPN working well. Replaced the router with a Zyxel P-660H which i cant get to work configured NON-NAT so have had to set it up using 1-1nat and pointed a public IP straight at the watchguard. when the MUVPN user tries to connect log says cant connect as remote end reports ip address is 192.168.1.20 ... any ideas how i can get this to work. preferably without changing the router again?
I have just installed a new router at a site where there was a SOHO6 with a public IP on untrusted and MUVPN working well. Replaced the router with a Zyxel P-660H which i cant get to work configured NON-NAT so have had to set it up using 1-1nat and pointed a public IP straight at the watchguard. when the MUVPN user tries to connect log says cant connect as remote end reports ip address is 192.168.1.20 ... any ideas how i can get this to work. preferably without changing the router again?