Thanks in advanced. Is there a way I can tell how many DID lines my site has. The list that I have is hit and miss when I set up the DID lines. I am working with a G3siV11. Not if I will have to call the phone company to find this out or if I can find out through the switch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Find out how many DID lines assogned to site
- Thread starter ARCOER
- Start date
DontDeleteMeAgain
Vendor
it's best if you call the vendor & request the CSR for the circuits you have. you can look at the dial plan for anything that has EXT, but that could also mislead you.
- Thread starter
- #3
phoneguy55
Programmer
Its Customer Service Record.
If the guy before you was a "good tech" he would leave this information in the bulletin board along with the sold to information. You can also look at the incoming call handling treatment as that might give you some clues.
If the guy before you was a "good tech" he would leave this information in the bulletin board along with the sold to information. You can also look at the incoming call handling treatment as that might give you some clues.
- Status
Similar threads
- Question