Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Find if Hash Value exists in Hash of Arrays

Status
Not open for further replies.
stevio

stevio

Vendor
Jul 24, 2002
78
AU
Hi there,

If I have a Hash of Arrays, how to you find out if a value exists for a given key.
Code: 
use Data::Dumper;

#populate hash
foreach (1 .. 4) {
   push @{ $hash{key1} },  $_;
}

foreach (5 .. 9) {
   push @{ $hash{key2} },  $_;
}
So if I wanted to find out if '1' exists in key1, how do I do that?

I've tried, if exists, grep, defined, searched this forum, can't get it to work etc
Code: 
$var1 = 1;
my %reverse = reverse %hash;
if( defined( $reverse{$var1} ) ) {
  print "1 is a value in the hash!\n";
}
else {
 print "1 is not a value in the hash!\n";
}

 
Sort by date Sort by votes
Code: 
foreach (1 .. 4) {
  push @{ $hash{key1} },  $_;
}

foreach (5 .. 9) {
  push @{ $hash{key2} },  $_;
}

$var1 = 1;
foreach $key (keys(%hash)) {
  for($i = 0; $i <= $#{$hash{$key}}; $i++) {
    if($var1 == $hash{$key}[$i]) {
      print "Found '$var1'! Key: $key, \$i = $i\n";
    }
  }
}

Output:
Code: 
Found '1'! Key: key1, $i = 0
 
Upvote 0 Downvote
Thanks whn, I didn't make my question very clear in the first place. I should have said, if the value exists, then do nothing, if not adding the value to that key.

Code: 
$VAR1 = {
          'key2' => [
                      5,
                      6,
                      7,
                      8,
                      9
                    ],
          'key1' => [
                      1,
                      2,
                      3,
                      4                      
                    ]
        };
So in the scenario above, key1 already has the value of '1', so no need to add. But if $var1 was 10, then it would need to be added.

My attempt at this has not been too successful

Code: 
foreach (1 .. 4) {
  push @{ $hash{key1} },  $_;
}

foreach (5 .. 9) {
  push @{ $hash{key2} },  $_;
}

$var1 = "key1";
$var2 = 1;
foreach $key (keys(%hash)) {
  for($i = 0; $i <= $#{$hash{$key}}; $i++) {
    if($var2 == $hash{$key}[$i]) {      
	  print "Found $var1 doing nothing\n";	  	  
	  print "Found '$var1'! Key: $key, \$i = $i\n";
    }
	else{
		push @{ $hash{$var1} },  $var2;
		print "Adding $var2 to $var1\n";
	}
  }
}

 
Upvote 0 Downvote
For example:
stevio.pl
Code: 
[COLOR=#804040][b]use strict[/b][/color];
[COLOR=#0000ff]#use warnings;[/color]

[COLOR=#804040][b]my[/b][/color] [COLOR=#008080]$key[/color] = [COLOR=#ff00ff]""[/color];
[COLOR=#804040][b]my[/b][/color] [COLOR=#008080]%lst_hash[/color] = ();

[COLOR=#0000ff]# populate hash[/color]
[COLOR=#0000ff]# key1[/color]
[COLOR=#008080]$key[/color] = [COLOR=#ff00ff]'[/color][COLOR=#ff00ff]key1[/color][COLOR=#ff00ff]'[/color];
[COLOR=#804040][b]my[/b][/color] [COLOR=#008080]@lst[/color] = ([COLOR=#ff00ff]1[/color] .. [COLOR=#ff00ff]4[/color]);
[COLOR=#0000ff]# add reference of @lst[/color]
[COLOR=#008080]$lst_hash{$key}[/color] =  \[COLOR=#008080]@lst[/color];

[COLOR=#008080]$key[/color] = [COLOR=#ff00ff]'[/color][COLOR=#ff00ff]key2[/color][COLOR=#ff00ff]'[/color];
[COLOR=#804040][b]my[/b][/color] [COLOR=#008080]@lst[/color] = ([COLOR=#ff00ff]5[/color] .. [COLOR=#ff00ff]8[/color]);
[COLOR=#0000ff]# add reference of @lst[/color]
[COLOR=#008080]$lst_hash{$key}[/color] =  \[COLOR=#008080]@lst[/color];

[COLOR=#0000ff]# print hash[/color]
[COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#ff00ff]Hash contains elements:[/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
print_hash();

[COLOR=#008080]$key[/color] = [COLOR=#ff00ff]'[/color][COLOR=#ff00ff]key1[/color][COLOR=#ff00ff]'[/color];
[COLOR=#804040][b]my[/b][/color] [COLOR=#008080]$element[/color] = [COLOR=#ff00ff]3[/color];
[COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#ff00ff]Trying to add element='[/color][COLOR=#008080]$element[/color][COLOR=#ff00ff]' for key='[/color][COLOR=#008080]$key[/color][COLOR=#ff00ff]':[/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
value2hash([COLOR=#008080]$key[/color], [COLOR=#008080]$element[/color]);
[COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#ff00ff]Hash contains elements:[/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
print_hash();

[COLOR=#008080]$key[/color] = [COLOR=#ff00ff]'[/color][COLOR=#ff00ff]key2[/color][COLOR=#ff00ff]'[/color];
[COLOR=#008080]$element[/color] = [COLOR=#ff00ff]9[/color];
[COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#ff00ff]Trying to add element='[/color][COLOR=#008080]$element[/color][COLOR=#ff00ff]' for key='[/color][COLOR=#008080]$key[/color][COLOR=#ff00ff]':[/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
value2hash([COLOR=#008080]$key[/color], [COLOR=#008080]$element[/color]);
[COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#ff00ff]Hash contains elements:[/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
print_hash();


[COLOR=#804040][b]sub [/b][/color][COLOR=#008080]print_hash [/color]{
  [COLOR=#0000ff]# print hash[/color]
  [COLOR=#804040][b]foreach[/b][/color] [COLOR=#008080]$key[/color] ([COLOR=#804040][b]sort[/b][/color] [COLOR=#804040][b]keys[/b][/color]([COLOR=#008080]%lst_hash[/color])){
    [COLOR=#0000ff]# dereference list[/color]
    [COLOR=#804040][b]my[/b][/color] [COLOR=#008080]@tmp_lst[/color] = [COLOR=#008080]@{$lst_hash{$key}}[/color];
    [COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#ff00ff]'[/color][COLOR=#008080]$key[/color][COLOR=#ff00ff]' => [/color][COLOR=#008080]$lst_hash{$key}[/color][COLOR=#ff00ff] = ([/color][COLOR=#008080]@tmp_lst[/color][COLOR=#ff00ff])[/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
  }
  [COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
}

[COLOR=#804040][b]sub [/b][/color][COLOR=#008080]value2hash [/color]{
  [COLOR=#0000ff]# add value to hash if it doesn't exist[/color]
  [COLOR=#804040][b]my[/b][/color] ([COLOR=#008080]$key[/color], [COLOR=#008080]$val[/color]) = [COLOR=#008080]@_[/color];
  [COLOR=#0000ff]# dereference list[/color]
  [COLOR=#804040][b]my[/b][/color] [COLOR=#008080]@lst[/color] = [COLOR=#008080]@{$lst_hash{$key}}[/color];
  [COLOR=#804040][b]my[/b][/color] [COLOR=#008080]$val_exist[/color] = [COLOR=#ff00ff]0[/color];
  [COLOR=#804040][b]foreach[/b][/color] [COLOR=#804040][b]my[/b][/color] [COLOR=#008080]$j[/color] ([COLOR=#008080]@lst[/color]) {
     [COLOR=#804040][b]if[/b][/color] ([COLOR=#008080]$j[/color] == [COLOR=#008080]$val[/color]) { 
      [COLOR=#008080]$val_exist[/color] = [COLOR=#ff00ff]1[/color];
      [COLOR=#804040][b]last[/b][/color];
    }
  }

  [COLOR=#804040][b]if[/b][/color] ([COLOR=#008080]$val_exist[/color] == [COLOR=#ff00ff]0[/color]) {
     [COLOR=#804040][b]push[/b][/color] ([COLOR=#008080]@lst[/color], [COLOR=#008080]$val[/color]) 
  }
  [COLOR=#804040][b]else[/b][/color] {
    [COLOR=#804040][b]print[/b][/color] [COLOR=#ff00ff]"[/color][COLOR=#ff00ff]ERROR: For key = '[/color][COLOR=#008080]$key[/color][COLOR=#ff00ff]' value [/color][COLOR=#008080]$val[/color][COLOR=#ff00ff] already exists ![/color][COLOR=#6a5acd]\n[/color][COLOR=#ff00ff]"[/color];
  }
  [COLOR=#0000ff]# add reference of @lst[/color]
  [COLOR=#008080]$lst_hash{$key}[/color] =  \[COLOR=#008080]@lst[/color];
}

Output:
Code: 
C:\_mikrom\Work>perl stevio.pl
Hash contains elements:
'key1' => ARRAY(0x29a28c) = (1 2 3 4)
'key2' => ARRAY(0x182c1ac) = (5 6 7 8)

Trying to add element='3' for key='key1':
ERROR: For key = 'key1' value 3 already exists !
Hash contains elements:
'key1' => ARRAY(0x183c654) = (1 2 3 4)
'key2' => ARRAY(0x182c1ac) = (5 6 7 8)

Trying to add element='9' for key='key2':
Hash contains elements:
'key1' => ARRAY(0x183c654) = (1 2 3 4)
'key2' => ARRAY(0x182bd9c) = (5 6 7 8 9)

 
Upvote 0 Downvote
Code: 
#!/usr/bin/perl
use strict;
use warnings FATAL => qw/ all /;
use List::MoreUtils qw/ any /;
use Data::Dumper;

# construct hash
my %hash;
push @{$hash{key1}}, $_ for ( 1 .. 4 );
push @{$hash{key2}}, $_ for ( 5 .. 9 );

# process hash
my $var1 = 1;
while ( my ( $key, $list ) = ( each %hash ) )
{
    push @$list, $var1 unless ( any { $_ == $var1 } @$list );
}

# print hash
print Dumper \%hash;

Chris
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ss_ham
  • Locked
  • Question
in Perl find call looking to exclude folder and ignore duplicate finds.
Replies
2
Views
212
ss_ham
ss_ham
newbie1238585
  • Locked
  • Question
Perl how to read string in csv file * as wildcard operator
Replies
2
Views
218
mikrom
mikrom
Anurag Sinha
  • Locked
  • Question
calling perl script on click of the button
Replies
0
Views
146
Anurag Sinha
Anurag Sinha
tonykent
  • Locked
  • Question
sort by hash key before printing
Replies
3
Views
187
tonykent
tonykent
rob54321
  • Locked
  • Question
Perl how to read line from file with interpolation 1
Replies
6
Views
375
rob54321
rob54321

Part and Inventory Search

Sponsor

Back
Top