Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FInd Hunt Group 1

Status
Not open for further replies.
Sep 4, 2001
23
0
0
US
The guy before me setup some hunt groups but never labeled them. Now we need to change one and cannot figure out which group it is.
I know which phones it rings too, but not the group number.
Is thre some way for me to figure this out?

Thanks
 
Go into System programming->hunt groups->show group:___ and press the list button. the display will be HG01:XXX with the XXX being the DN of the hunt group. there are 30 possible hunt groups but most people use the lowest number available. If you are not sure just dial the DN of each group and see if it answers the group you are interested in. alternativly if you know the ext's in the group list the members and see which group matches. JerryReeve
Communications Systems Int'l
com-sys.com
 
At the phone that it rings to, do a F*0 and press the Hunt Group key and it will tell you which HG that phone is in.
DueE
 
DueE,
Sure!! Give him the easy answer! JerryReeve
Communications Systems Int'l
com-sys.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top