Filtering Calls/phone numbers by ANI

[sienz]

Is there a way we can setup a call screening/filtering based on ANI?

I understand that we can block the user by putting a script in the gateway (h323) but I want to redirect the call to a voicemail box/or some kind of music on hold.

We have CUCM 6.1, Unity 5.0 and IPCC express.



Thanks,



sienz

 

[whykap]

You can filter by ANI using IPCC. Your script can look for the predefined ANI and route the call accordingly.

 

[sienz]

hi Thanks whykap

So i may need to add this script in the front of the extension that i want to filter in.

 

[whykap]

I am not clear exactly what you are trying to achieve but in a nut shell yes.

 

[sienz]

I was trying to find out if the script can work for all extensions/DNs. Because the way i see the setup in our IPCC, you assign a DN/trigger number in a script. So we someone called the trigger number, I will follow the call flow in the script.

 

[whykap]

That's right, any call pointed to that trigger would have to follow the scripts flow. And the script can simply be a ANI look up and filtering and nothing else if that's all you need.

 

[sienz]

Is there away to apply this script to all DID in our system, so if the caller call from xxx.xxx.xxxx to any numbers in our DID, it will follow the scripts flow instead of one DID.

Our problem right now is only for 1 DID but i want to have the option to apply it to all DID.

Thank you for your inputs, appreciated.

 

[whykap]

You'll have to point all your DID's to the trigger, collect called number as well as calling number (ANI), filter the ANI and if it matches do what you are planning on doing with it. If no match send it to the phone that the called number was intented to originally.
Definately doable but it will take some work.