Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

filesync fails to LSP(s8300)

Status
Not open for further replies.

AvayaEng

Technical User
Oct 19, 2005
37
ZA
hi

I have an s8500B(CM 3.0.1)with a s8300 LSP(CM 3.0.1) in a G350. When I try save translatiosn to the LSP I get the following erros. Please Help:
s8500B:
20061101:000555843:432:filesyncd(6879):MED:[Performing filesync: set = pwd, type = LSP, targets = 2, bytes = 678]
20061101:000555844:433:filesyncd(6918):MED:[client_mgr-2: starting filesync to IPaddr = 10.39.92.195]
20061101:000556312:435:filesyncd(6918):HIGH:[ERROR: ssl_read: SSL_read failed: premature close]
20061101:000556312:436:filesyncd(6918):HIGH:[ERROR: ssl_write: SSL_write failed: 1]
20061101:000556312:437:filesyncd(6918):HIGH:[ERROR: ssl_write: error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure]
20061101:000556312:438:filesyncd(6918):HIGH:[ERROR: start_tlv: send_tag failed for CMD_PROTOVER message]
20061101:000556312:439:filesyncd(6918):HIGH:[ERROR: failed to start initial TLV exchanges]
20061101:000556312:440:filesyncd(6918):HIGH:[ERROR: client_mgr-2: filesync api failed for host 10.39.92.195]
20061101:000556312:441:filesyncd(6918):MED:[client_mgr-2: filesync attempt complete]
20061101:000556330:450:filesyncd(6919):HIGH:[ERROR: ssl_close: shutdown call failed: Transport endpoint is not connected]
20061101:000556330:451:filesyncd(6879):MED:[doFileset: Filesync finished: status=Failure; rc=11]
s8300:
20061101:000605193:122:filesync_rcv(22076):HIGH:[ERROR: valid_peer: illegal connection attempt from 10.11.1.132]
20061101:000605193:121:filesync_rcv(22076):HIGH:[ERROR: valid_peer: Host 10.11.1.132 is not a valid source.]
20061101:000604787:120:filesync_rcv(22076):MED:[rcv_files: connection from 10.11.1.132 port 33678]
 
yes the LSP in inservice/idle.
On the LSP it states in the logs:
illegal connection attempt from 10.11.1.132
Host 10.11.1.132 is not a valid source.
connection from 10.11.1.132 port 33678]

I have doubled checked my LSP information in configure server aand it is all good.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top