FILE SYSTEM ROUTINE TEST ERROR

[Omissam]

Hello to all.
For a few days I have this error code.
I can not delete it.
Can you help me?
Thanks


AUTHORITY CLASS 7
(C) COPYRIGHT ERICSSON
OSPEDALE-S.F.N. 09AUG13 19:56:00 1-0-60-01 SYSTERMINAL

<ALLOP;
ALARM LOG
IDENTITY: OSPEDALE-S.F.N.
VERSION: CXP1010115/2/BC12SP10/R7A

DATE: 09AUG13 TIME: 19:56:26
CLASS: 3
108 FILE SYSTEM ROUTINE TEST ERROR
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3
09AUG13 19:26:00 3 1 001-0-60-00 106 2 0 1




LAST ALREI: 09AUG13, 18:30:49

END
<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER FUJITSU IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERMINAL1 001-0-60-2 - MML - 7
SYSN SYSTERMINAL2 001-0-60-3 - MML - 7
SYSN SMS-SC 001-0-60-4 - NETWORK/OUT IN SERVICE
SYSN TELNET 001-0-60-4 - NETWORK/MML - 7
SYSN3 - 001-2-30 - - IN SERVICE
SYSN2 - 002-0-60 - - IN SERVICE
SYSN2 SYSTERMINAL3 002-0-60-1 - MML - 7
SYSN2 SYSTERMINAL4 002-0-60-2 - MML - 7
SYSN2 SYSTERMINAL5 002-0-60-3 - MML - 7
SYSN2 TELNET2 002-0-60-4 - NETWORK/OUT IN SERVICE
SYSN5 - 002-1-50 - - IN SERVICE
SYSN5 SMDR 002-1-50-4 - NETWORK/OUT IN SERVICE
SYSN4 - 003-1-72 - - IN SERVICE
SYSN4 NIUMIL 003-1-72-4 - NETWORK/OUT IN SERVICE
END

<

 

[himdp]

HDU partition is nearly full. Find out which subfile system using FISCP.
You need to clean the space or install an additional HDU.

 

[Omissam]

OK....... FISCP

FISCP:IODEV=SYSDISK1;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 28615 MBYTES
SUBFS: SYSSUBFS11
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
65536 0 16000 /SYSN/USR1
SUBFS: SYSSUBFS21
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
65536 43728 16000 /SYSN/USR2
END


That use command to free up space on HD?

Thanks

 

[himdp]

SYSSUBFS11 has no free space. You must check this and see if files can be deleted or moved to free up some space.
Alternative is to add a new storage device.

 

[himdp]

Note, if you have traffic recording running you could follow the advice here-

http://www.tek-tips.com/viewthread.cfm?qid=436205

 

[Omissam]

I actually running the tracing FIDIE can use the command: PATH = / SYSN/USR1/ACS/TM / **; (release BC12)

 

[himdp]

FIDIE will work on BC12. Make sure that you type it correctly(not like your example) without spaces and with *.* see below-
FIDIEATH=/SYSN/USR1/ACS/TM/*.*;

 

[Omissam]

Thanks HIMDP for the correction of the command and ........ crossing fingers. (sorry for my english)

Hello Max

 

[himdp]

Hi Omissam,
no problem with the English, it's better than my Italian