Feature 4 to an outside line

[dnnysgir]

How do we build a route to use Feature 4 9 then the number on a BCM 50?

 

[Firebird Scrambler]

If you want to setup a call forward external, then the extension has to be enabled to allow this feature.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[gberger]

In your case, digit "9" has to be a destination code and not a pool access code.Then you need to enable the redirect feature under capabilities of each sets then you'll be able to call forward to external(works better with PRI..)

 

[oldestgeek]

Remember that when a call is forwarded to an outside line, you're tying up two lines when someone dials the forwarded set. Also voice volume will be significantly lowered if it's analog.

 

[SIRMcD]

Sounds like a bad case of Toll Fraud, if you enable this be sure to restrict that dn with a cos password.