Fax server

[dennyl8]

Hi all
Have you ever coupled Md110 with brooktrout E1 card?
danilo

 

[lalrl]

yes, no problems

 

[cuneyt2020]

The critical point is, when you configure a route t faxserver, if 8 of trunk is licensed in Fax server, then you should remove the rest of trunks in md110, only 8 trunk should be added in MD110 route

 

[dennyl8]

Thank you for your suggestion
I wish to know(sorry for my english,I hope so clear)
if it's necessary to configure Md110 like NT with protocol Dss1 and if there's other main parameter to set up
hi danilo

 

[cuneyt2020]

We have Ericsson Bc12 system with Rightfax server using Brooktrout E1 card

And here are the parameters that is configured on BC12

[tt]
<RODAP:ROU=74;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
74 SL60 H'00000350 H'15580000 H'44200010 NO

END

<ROCAP:ROU=74;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
74 0111100000000010 5 0100000007 0 30 128 03151515 111100100031 111111

<roddpEST=8458;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
8458 74 0025200000000250000001110 0 5 0

[/tt]

You can use ISDN QSIG also..
It works.