Fax? Programming? Is this right? 1

[altolabado]

Hi can anyone help? Is this the correct values for a simple fax line?

DES FAX
TN 012 0 14 11
TYPE 500
CDEN 4D
CUST 0
DN 3841 0 MARP
AST NO
IAPG 0
HUNT
TGAR 0
NCOS 1
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFA WTD FND HTD ONS
LPR XRA CWD SWD MWD RMMD SMWD LPD XHD CCSD LND
CFTD SFD MRD C6D CNID CLBD AUTU
CDMD EHTD MCTD
CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD DDGA NAMA
SHL CFHD
USRD BNRD RTDD RBDD RBHD FAXD PGND FTTU
AACS NO
DATE 19 JAN 2001


NACT

 

[johnpoole]

don't know about your switch set up for ncos/tgar but that works for incoming, just checked to make sure htd and fnd were not sending incoming fax anywhere strange (console or voice mail) and dtn was on. the ncos may block ld just ckeck ncos on a set that has ld now to be sure

john poole
bellsouth business
columbia,sc

 

[CheckerPig]

Set the Prompt im CLS from FAXD to FAXA !

 

[sandyml]

No, you don't want to do that. FAXA pertains to ISDN (ISDN call is generated with 3.1 KHz Bearer Capability_). Not a feature for standard analog line.

 

[CheckerPig]

Sorry perhaps I don?t undeerstand the Problem. Is it a analog PSTN line or a FAX Port from the Meridian.
Is it a Meridian Port. we have Had Problems to sent Faxes to other PBX Ports outside !

DO have a PRI on the PBX or a analog PSTN lINE for the FAx

Sorry if I Understand you !!!

Thanks

 

[Reusser]

FAX lines generally do not use transfer or conf features - I generally change XFA to XFR - will prevent some of those misterious calls to console

 

[sandyml]

checkerpig, switchy is trying to program an analog port off his PBX for a fax line. As Reusser says, leave off transfer and conf features; they are most often just unnecessary and sometimes just open up the line for hackers. Otherwise, it's just a simple analog line. If for some reason you are also using a PSTN line, it still is not a FAXA situation, unless this is ISDN in your PBX.

 

[CheckerPig]

Thank you Sandyml !
But we have had the situation that we can?t receive Fax from other Faxlines !
Than we changed the FAXA Prompt to allowed and we can receive them. No more Problems. It also depends on Bearer capability ( IN german: Dienstekennung?) !
Maybe the other side had a wrong choice for their Port ?

Can this be a reason !

Thanks for you help !!!