fax over PRI with Netlink

[cayres1003]

I have 3 sites all netlink'd together and 3 sites hanging off through ccis. I am having problems with faxing all around. Apparently sending seems to be working, but inbound is problematic. I have enabled 84-33 profile 1 for NetLink and CCIS.

Anybody have a similar problem.

 

[CoralTech]

What system and processor.

 

[cayres1003]

cpu20 - sv9100

 

[CoralTech]

There is a specific white paper on that on NTAC. It's weird because its different from a CP10.

 

[erniejoey]

I had this problem when we went from CP-10 to CP-20. In 84-33-01 (Fax Relay Mode) for SIP Trunk with CP-20 should be disabled. With CP-10 it was enabled. Just a thought...

 

[cayres1003]

Thanks emiejoey. because I went and turned it on first thing after the install. I can try turning it off and see if it helps.
CoralTech, I will see if I can find the post.
I will let you know.

 

[CoralTech]

No that was it. Something that isn't very intuitive.